-- Network Working Group Editor of this version:
-- Request for Comments: 3418 R. Presuhn
-- STD: 62 BMC Software, Inc.
-- Obsoletes: 1907 Authors of previous version:
-- Category: Standards Track J. Case
-- SNMP Research, Inc.
-- K. McCloghrie
-- Cisco Systems, Inc.
-- M. Rose
-- Dover Beach Consulting, Inc.
-- S. Waldbusser
-- International Network Services
-- December 2002
-- Management Information Base (MIB) for the
-- Simple Network Management Protocol (SNMP)SNMPv2-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,TimeTicks,Counter32, snmpModules, mib-2
FROM SNMPv2-SMI
DisplayString,TestAndIncr,TimeStampFROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF;snmpMIB MODULE-IDENTITYLAST-UPDATED"200210160000Z"ORGANIZATION"IETF SNMPv3 Working Group"CONTACT-INFO"WG-EMail: snmpv3@lists.tislabs.com
Subscribe: snmpv3-request@lists.tislabs.com
Co-Chair: Russ Mundy
Network Associates Laboratories
postal: 15204 Omega Drive, Suite 300
Rockville, MD 20850-4601
USA
EMail: mundy@tislabs.com
phone: +1 301 947-7107
Co-Chair: David Harrington
Enterasys Networks
postal: 35 Industrial Way
P. O. Box 5005
Rochester, NH 03866-5005
USA
EMail: dbh@enterasys.com
phone: +1 603 337-2614
Editor: Randy Presuhn
BMC Software, Inc.
postal: 2141 North First Street
San Jose, CA 95131
USA
EMail: randy_presuhn@bmc.com
phone: +1 408 546-1006"DESCRIPTION"The MIB module for SNMP entities.
Copyright (C) The Internet Society (2002). This
version of this MIB module is part of RFC 3418;
see the RFC itself for full legal notices.
"REVISION"200210160000Z"
DESCRIPTION"This revision of this MIB module was published as
RFC 3418."REVISION"199511090000Z"DESCRIPTION"This revision of this MIB module was published as
RFC 1907."REVISION"199304010000Z"DESCRIPTION"The initial revision of this MIB module was published
as RFC 1450."::={ snmpModules 1}snmpMIBObjects OBJECTIDENTIFIER::={ snmpMIB 1}-- ::= { snmpMIBObjects 1 } this OID is obsolete-- ::= { snmpMIBObjects 2 } this OID is obsolete-- ::= { snmpMIBObjects 3 } this OID is obsolete-- the System group---- a collection of objects common to all managed systems.system OBJECTIDENTIFIER::={ mib-2 1}
sysDescr OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A textual description of the entity. This value should
include the full name and version identification of
the system's hardware type, software operating-system,
and networking software."::={ system 1}sysObjectID OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor's authoritative identification of the
network management subsystem contained in the entity.
This value is allocated within the SMI enterprises
subtree (1.3.6.1.4.1) and provides an easy and
unambiguous means for determining `what kind of box' is
being managed. For example, if vendor `Flintstones,
Inc.' was assigned the subtree 1.3.6.1.4.1.424242,
it could assign the identifier 1.3.6.1.4.1.424242.1.1
to its `Fred Router'."::={ system 2}sysUpTime OBJECT-TYPESYNTAXTimeTicksMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The time (in hundredths of a second) since the
network management portion of the system was last
re-initialized."::={ system 3}sysContact OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))MAX-ACCESSread-write
STATUScurrentDESCRIPTION"The textual identification of the contact person for
this managed node, together with information on how
to contact this person. If no contact information is
known, the value is the zero-length string."::={ system 4}sysName OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An administratively-assigned name for this managed
node. By convention, this is the node's fully-qualified
domain name. If the name is unknown, the value is
the zero-length string."::={ system 5}sysLocation OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The physical location of this node (e.g., 'telephone
closet, 3rd floor'). If the location is unknown, the
value is the zero-length string."::={ system 6}sysServices OBJECT-TYPESYNTAXINTEGER(0..127)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A value which indicates the set of services that this
entity may potentially offer. The value is a sum.
This sum initially takes the value zero. Then, for
each layer, L, in the range 1 through 7, that this node
performs transactions for, 2 raised to (L - 1) is added
to the sum. For example, a node which performs only
routing functions would have a value of 4 (2^(3-1)).
In contrast, a node which is a host offering application
services would have a value of 72 (2^(4-1) + 2^(7-1)).
Note that in the context of the Internet suite of
protocols, values should be calculated accordingly:
layer functionality
1 physical (e.g., repeaters)
2 datalink/subnetwork (e.g., bridges)
3 internet (e.g., supports the IP)
4 end-to-end (e.g., supports the TCP)
7 applications (e.g., supports the SMTP)
For systems including OSI protocols, layers 5 and 6
may also be counted."::={ system 7}-- object resource information---- a collection of objects which describe the SNMP entity's-- (statically and dynamically configurable) support of-- various MIB modules.sysORLastChange OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-only
STATUScurrentDESCRIPTION"The value of sysUpTime at the time of the most recent
change in state or value of any instance of sysORID."::={ system 8}sysORTable OBJECT-TYPESYNTAXSEQUENCEOF SysOREntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The (conceptual) table listing the capabilities of
the local SNMP application acting as a command
responder with respect to various MIB modules.
SNMP entities having dynamically-configurable support
of MIB modules will have a dynamically-varying number
of conceptual rows."::={ system 9}sysOREntry OBJECT-TYPESYNTAX SysOREntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"An entry (conceptual row) in the sysORTable."INDEX{ sysORIndex }::={ sysORTable 1}
SysOREntry ::=SEQUENCE{
sysORIndex INTEGER,
sysORID OBJECTIDENTIFIER,
sysORDescr DisplayString,
sysORUpTime TimeStamp}sysORIndex OBJECT-TYPESYNTAXINTEGER(1..2147483647)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The auxiliary variable used for identifying instances
of the columnar objects in the sysORTable."::={ sysOREntry 1}
sysORID OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"An authoritative identification of a capabilities
statement with respect to various MIB modules supported
by the local SNMP application acting as a command
responder."::={ sysOREntry 2}sysORDescr OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A textual description of the capabilities identified
by the corresponding instance of sysORID."::={ sysOREntry 3}sysORUpTime OBJECT-TYPESYNTAXTimeStamp
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value of sysUpTime at the time this conceptual
row was last instantiated."::={ sysOREntry 4}-- the SNMP group---- a collection of objects providing basic instrumentation and-- control of an SNMP entity.snmp OBJECTIDENTIFIER::={ mib-2 11}snmpInPkts OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of messages delivered to the SNMP
entity from the transport service."::={ snmp 1}snmpInBadVersions OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of SNMP messages which were delivered
to the SNMP entity and were for an unsupported SNMP
version."::={ snmp 3}snmpInBadCommunityNames OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of community-based SNMP messages (for
example, SNMPv1) delivered to the SNMP entity which
used an SNMP community name not known to said entity.
Also, implementations which authenticate community-based
SNMP messages using check(s) in addition to matching
the community name (for example, by also checking
whether the message originated from a transport address
allowed to use a specified community name) MAY include
in this value the number of messages which failed the
additional check(s). It is strongly RECOMMENDED that
the documentation for any security model which is used
to authenticate community-based SNMP messages specify
the precise conditions that contribute to this value."::={ snmp 4}snmpInBadCommunityUses OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of community-based SNMP messages (for
example, SNMPv1) delivered to the SNMP entity which
represented an SNMP operation that was not allowed for
the SNMP community named in the message. The precise
conditions under which this counter is incremented
(if at all) depend on how the SNMP entity implements
its access control mechanism and how its applications
interact with that access control mechanism. It is
strongly RECOMMENDED that the documentation for any
access control mechanism which is used to control access
to and visibility of MIB instrumentation specify the
precise conditions that contribute to this value."::={ snmp 5}snmpInASNParseErrs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of ASN.1 or BER errors encountered by
the SNMP entity when decoding received SNMP messages."::={ snmp 6}snmpEnableAuthenTraps OBJECT-TYPESYNTAXINTEGER{ enabled(1), disabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates whether the SNMP entity is permitted to
generate authenticationFailure traps. The value of this
object overrides any configuration information; as such,
it provides a means whereby all authenticationFailure
traps may be disabled.
Note that it is strongly recommended that this object
be stored in non-volatile memory so that it remains
constant across re-initializations of the network
management system."::={ snmp 30}snmpSilentDrops OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of Confirmed Class PDUs (such as
GetRequest-PDUs, GetNextRequest-PDUs,
GetBulkRequest-PDUs, SetRequest-PDUs, and
InformRequest-PDUs) delivered to the SNMP entity which
were silently dropped because the size of a reply
containing an alternate Response Class PDU (such as a
Response-PDU) with an empty variable-bindings field
was greater than either a local constraint or the
maximum message size associated with the originator of
the request."
::={ snmp 31}snmpProxyDrops OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of Confirmed Class PDUs
(such as GetRequest-PDUs, GetNextRequest-PDUs,
GetBulkRequest-PDUs, SetRequest-PDUs, and
InformRequest-PDUs) delivered to the SNMP entity which
were silently dropped because the transmission of
the (possibly translated) message to a proxy target
failed in a manner (other than a time-out) such that
no Response Class PDU (such as a Response-PDU) could
be returned."::={ snmp 32}-- information for notifications---- a collection of objects which allow the SNMP entity, when-- supporting a notification originator application,-- to be configured to generate SNMPv2-Trap-PDUs.snmpTrap OBJECTIDENTIFIER::={ snmpMIBObjects 4}
snmpTrapOID OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"The authoritative identification of the notification
currently being sent. This variable occurs as
the second varbind in every SNMPv2-Trap-PDU and
InformRequest-PDU."::={ snmpTrap 1}-- ::= { snmpTrap 2 } this OID is obsoletesnmpTrapEnterprise OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"The authoritative identification of the enterprise
associated with the trap currently being sent. When an
SNMP proxy agent is mapping an RFC1157 Trap-PDU
into a SNMPv2-Trap-PDU, this variable occurs as the
last varbind."::={ snmpTrap 3}-- ::= { snmpTrap 4 } this OID is obsolete-- well-known trapssnmpTraps OBJECTIDENTIFIER::={ snmpMIBObjects 5}coldStart NOTIFICATION-TYPESTATUScurrentDESCRIPTION"A coldStart trap signifies that the SNMP entity,
supporting a notification originator application, is
reinitializing itself and that its configuration may
have been altered."::={ snmpTraps 1}warmStart NOTIFICATION-TYPESTATUScurrentDESCRIPTION"A warmStart trap signifies that the SNMP entity,
supporting a notification originator application,
is reinitializing itself such that its configuration
is unaltered."::={ snmpTraps 2}-- Note the linkDown NOTIFICATION-TYPE ::= { snmpTraps 3 }-- and the linkUp NOTIFICATION-TYPE ::= { snmpTraps 4 }-- are defined in RFC 2863 [RFC2863]authenticationFailure NOTIFICATION-TYPESTATUScurrentDESCRIPTION"An authenticationFailure trap signifies that the SNMP
entity has received a protocol message that is not
properly authenticated. While all implementations
of SNMP entities MAY be capable of generating this
trap, the snmpEnableAuthenTraps object indicates
whether this trap will be generated."::={ snmpTraps 5}-- Note the egpNeighborLoss notification is defined-- as { snmpTraps 6 } in RFC 1213-- the set group---- a collection of objects which allow several cooperating-- command generator applications to coordinate their use of the
-- set operation.snmpSet OBJECTIDENTIFIER::={ snmpMIBObjects 6}snmpSetSerialNo OBJECT-TYPESYNTAXTestAndIncrMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An advisory lock used to allow several cooperating
command generator applications to coordinate their
use of the SNMP set operation.
This object is used for coarse-grain coordination.
To achieve fine-grain coordination, one or more similar
objects might be defined within each MIB group, as
appropriate."::={ snmpSet 1}-- conformance informationsnmpMIBConformance
OBJECTIDENTIFIER::={ snmpMIB 2}
snmpMIBCompliances
OBJECTIDENTIFIER::={ snmpMIBConformance 1}snmpMIBGroups OBJECTIDENTIFIER::={ snmpMIBConformance 2}-- compliance statements-- ::= { snmpMIBCompliances 1 } this OID is obsoletesnmpBasicCompliance MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for SNMPv2 entities which
implement the SNMPv2 MIB.
This compliance statement is replaced by
snmpBasicComplianceRev2."MODULE-- this moduleMANDATORY-GROUPS{ snmpGroup, snmpSetGroup, systemGroup,
snmpBasicNotificationsGroup }GROUP snmpCommunityGroup
DESCRIPTION"This group is mandatory for SNMPv2 entities which
support community-based authentication."::={ snmpMIBCompliances 2}snmpBasicComplianceRev2 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for SNMP entities which
implement this MIB module."MODULE-- this moduleMANDATORY-GROUPS{ snmpGroup, snmpSetGroup, systemGroup,
snmpBasicNotificationsGroup }GROUP snmpCommunityGroup
DESCRIPTION"This group is mandatory for SNMP entities which
support community-based authentication."GROUP snmpWarmStartNotificationGroup
DESCRIPTION"This group is mandatory for an SNMP entity which
supports command responder applications, and is
able to reinitialize itself such that its
configuration is unaltered."
::={ snmpMIBCompliances 3}-- units of conformance-- ::= { snmpMIBGroups 1 } this OID is obsolete-- ::= { snmpMIBGroups 2 } this OID is obsolete-- ::= { snmpMIBGroups 3 } this OID is obsolete-- ::= { snmpMIBGroups 4 } this OID is obsoletesnmpGroup OBJECT-GROUPOBJECTS{ snmpInPkts,
snmpInBadVersions,
snmpInASNParseErrs,
snmpSilentDrops,
snmpProxyDrops,
snmpEnableAuthenTraps }STATUScurrentDESCRIPTION"A collection of objects providing basic instrumentation
and control of an SNMP entity."::={ snmpMIBGroups 8}snmpCommunityGroup OBJECT-GROUPOBJECTS{ snmpInBadCommunityNames,
snmpInBadCommunityUses }STATUScurrentDESCRIPTION"A collection of objects providing basic instrumentation
of a SNMP entity which supports community-based
authentication."::={ snmpMIBGroups 9}snmpSetGroup OBJECT-GROUPOBJECTS{ snmpSetSerialNo }STATUScurrentDESCRIPTION"A collection of objects which allow several cooperating
command generator applications to coordinate their
use of the set operation."::={ snmpMIBGroups 5}systemGroup OBJECT-GROUPOBJECTS{ sysDescr, sysObjectID, sysUpTime,
sysContact, sysName, sysLocation,
sysServices,
sysORLastChange, sysORID,
sysORUpTime, sysORDescr }STATUScurrentDESCRIPTION"The system group defines objects which are common to all
managed systems."::={ snmpMIBGroups 6}snmpBasicNotificationsGroup NOTIFICATION-GROUPNOTIFICATIONS{ coldStart, authenticationFailure }STATUScurrentDESCRIPTION"The basic notifications implemented by an SNMP entity
supporting command responder applications."::={ snmpMIBGroups 7}snmpWarmStartNotificationGroup NOTIFICATION-GROUPNOTIFICATIONS{ warmStart }STATUScurrent
DESCRIPTION"An additional notification for an SNMP entity supporting
command responder applications, if it is able to reinitialize
itself such that its configuration is unaltered."::={ snmpMIBGroups 11}snmpNotificationGroup OBJECT-GROUPOBJECTS{ snmpTrapOID, snmpTrapEnterprise }STATUScurrentDESCRIPTION"These objects are required for entities
which support notification originator applications."::={ snmpMIBGroups 12}-- definitions in RFC 1213 made obsolete by the inclusion of a-- subset of the snmp group in this MIBsnmpOutPkts OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP Messages which were
passed from the SNMP protocol entity to the
transport service."::={ snmp 2}-- { snmp 7 } is not usedsnmpInTooBigs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP PDUs which were
delivered to the SNMP protocol entity and for
which the value of the error-status field was
`tooBig'."::={ snmp 8}snmpInNoSuchNames OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP PDUs which were
delivered to the SNMP protocol entity and for
which the value of the error-status field was
`noSuchName'."::={ snmp 9}snmpInBadValues OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP PDUs which were
delivered to the SNMP protocol entity and for
which the value of the error-status field was
`badValue'."::={ snmp 10}snmpInReadOnlys OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number valid SNMP PDUs which were delivered
to the SNMP protocol entity and for which the value
of the error-status field was `readOnly'. It should
be noted that it is a protocol error to generate an
SNMP PDU which contains the value `readOnly' in the
error-status field, as such this object is provided
as a means of detecting incorrect implementations of
the SNMP."::={ snmp 11}snmpInGenErrs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP PDUs which were delivered
to the SNMP protocol entity and for which the value
of the error-status field was `genErr'."::={ snmp 12}snmpInTotalReqVars OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of MIB objects which have been
retrieved successfully by the SNMP protocol entity
as the result of receiving valid SNMP Get-Request
and Get-Next PDUs."::={ snmp 13}snmpInTotalSetVars OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of MIB objects which have been
altered successfully by the SNMP protocol entity as
the result of receiving valid SNMP Set-Request PDUs."::={ snmp 14}snmpInGetRequests OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP Get-Request PDUs which
have been accepted and processed by the SNMP
protocol entity."::={ snmp 15}
snmpInGetNexts OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP Get-Next PDUs which have been
accepted and processed by the SNMP protocol entity."::={ snmp 16}snmpInSetRequests OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP Set-Request PDUs which
have been accepted and processed by the SNMP protocol
entity."::={ snmp 17}snmpInGetResponses OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsolete
DESCRIPTION"The total number of SNMP Get-Response PDUs which
have been accepted and processed by the SNMP protocol
entity."::={ snmp 18}snmpInTraps OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP Trap PDUs which have been
accepted and processed by the SNMP protocol entity."::={ snmp 19}snmpOutTooBigs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP PDUs which were generated
by the SNMP protocol entity and for which the value
of the error-status field was `tooBig.'"::={ snmp 20}snmpOutNoSuchNames OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP PDUs which were generated
by the SNMP protocol entity and for which the value
of the error-status was `noSuchName'."::={ snmp 21}snmpOutBadValues OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP PDUs which were generated
by the SNMP protocol entity and for which the value
of the error-status field was `badValue'."::={ snmp 22}
-- { snmp 23 } is not usedsnmpOutGenErrs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP PDUs which were generated
by the SNMP protocol entity and for which the value
of the error-status field was `genErr'."::={ snmp 24}snmpOutGetRequests OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP Get-Request PDUs which
have been generated by the SNMP protocol entity."::={ snmp 25}snmpOutGetNexts OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-only
STATUSobsoleteDESCRIPTION"The total number of SNMP Get-Next PDUs which have
been generated by the SNMP protocol entity."::={ snmp 26}snmpOutSetRequests OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP Set-Request PDUs which
have been generated by the SNMP protocol entity."::={ snmp 27}snmpOutGetResponses OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP Get-Response PDUs which
have been generated by the SNMP protocol entity."
::={ snmp 28}snmpOutTraps OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUSobsoleteDESCRIPTION"The total number of SNMP Trap PDUs which have
been generated by the SNMP protocol entity."::={ snmp 29}snmpObsoleteGroup OBJECT-GROUPOBJECTS{ snmpOutPkts, snmpInTooBigs, snmpInNoSuchNames,
snmpInBadValues, snmpInReadOnlys, snmpInGenErrs,
snmpInTotalReqVars, snmpInTotalSetVars,
snmpInGetRequests, snmpInGetNexts, snmpInSetRequests,
snmpInGetResponses, snmpInTraps, snmpOutTooBigs,
snmpOutNoSuchNames, snmpOutBadValues,
snmpOutGenErrs, snmpOutGetRequests, snmpOutGetNexts,
snmpOutSetRequests, snmpOutGetResponses, snmpOutTraps
}STATUSobsoleteDESCRIPTION"A collection of objects from RFC 1213 made obsolete
by this MIB module."::={ snmpMIBGroups 10}END